WHOLESALE ACM SIGN PRODUCTION

Wholesale ACM printing & cutting for sign shops.

Printed and routed aluminum composite panels for everyday rigid signs, property signage, directional signs, real-estate panels, displays and repeat sign programs.

NO MINIMUM FINISHED DIMENSIONSmall parts welcomeNo preset 6-inch-style part-size minimum. Material billing rules still apply.
NO CONTOUR SURCHARGEStandard contour cutting includedNo separate contour-cut charge on standard ACM production.
HOLES INCLUDEDNo extra drilling chargeStandard hole drilling is included when supplied in the production file or dimensioned drawing.

Standard ACM production

ACM is one of the core rigid products in the Signs All Day standard lane. Send finished sizes and quantities. Get your price within 12 hours.

  • 48 × 96-inch sheet-based production.
  • Direct print for production sign work.
  • Straight cuts and standard contour cutting.
  • No extra charge for standard contour cuts.
  • No extra charge for standard hole drilling.
  • No preset minimum finished-piece dimension. Small parts are welcome when they can be produced safely and accurately; material billing rules still apply.

UV protection, laminate and clearcoat

For outdoor ACM, the protective finish can be as important for sunlight exposure as it is for scratches and handling. A compatible UV-resistant overlaminate can help reduce the amount of UV exposure reaching the printed image and support longer color life on signs installed outdoors.

UV-cured ink is not the same thing as UV protection. The ink is cured with ultraviolet light, but exterior color life still depends on the ink system, substrate, exposure, orientation and protective layer. For church signs, property signs, parking signs and other long-term exterior work, specify the laminate or coating your job requires.

Clearcoat is available for added surface protection and specified finishes, but UV resistance depends on the actual coating chemistry. We do not assume every clearcoat provides the same UV protection as a UV-rated overlaminate.

ACM, Dibond and MaxMetal-type panel specifications

“ACM” describes aluminum composite material, but branded products and panel constructions can differ in skin thickness, coating, core and flatness. If a project calls for Dibond, MaxMetal or another named panel, provide that requirement with the job. Specified brands and unusual constructions are quoted.

COMPARE ACM MATERIAL DETAILS →

Cutting, holes and small parts

No contour surcharge. Standard contour cutting is included in the production price rather than added as a separate fee.

No extra charge for standard holes. Include hole locations and diameters in the production artwork or dimensioned drawing. The production review checks actual geometry, spacing and material requirements before acceptance.

No minimum finished-piece dimension. This refers to the physical size of the part, not order quantity. Small and narrow ACM pieces are accepted when they can be produced safely and accurately. Full-sheet or other material-billing rules still apply.

Dense nests, unusually fragile shapes and specialty routing can move outside the standard lane even when the material itself is standard.

Trade-only fulfillment

ACM orders can ship to your shop, installer, project location or end customer. Approved customer-branded fulfillment keeps your company identity on the shipment and paperwork while Signs All Day remains the production source behind the job.

YOUR CUSTOMER STAYS YOURS →